Above Ground Storage Tank Products

 


620

Anti-Siphon Valve

The Anti-Siphon Valve is used on above ground storage tanks to prevent spillage and to avoid other potential hazards. In the event a siphon occurs due to a rupture in the product pipe line, the valve will automatically stop the product flow. The valve is a normally closed check valve and will resist hydrostatic head pressure and prevent siphoning. The anti-siphon valve features a rust resistant epoxy coated cast iron body, precision machined bronze seat, Buna-N seals and is also available with a pressure relief valve to relieve thermal expansion (Model 620PR).

Product drawing 1 1/2"

Product drawing 2"

Model Size Head Pressure Height Width Weight (lbs.)
62015

1½"

0 - 5' 4½" 4" 4.5
620156 1½" 6 - 10' 4½" 4" 4.5
6201511

1½"

11 - 15' 4½" 4" 4.5
62015PR 1½" 0 - 5' 4½" 4" 4.5
62015PR6

1½"

6 - 10' 4½" 4" 4.5
62015PR11 1½" 11 - 15' 4½" 4" 4.5
62020 2" 0 - 5' 5¼" 4 5/8" 7.5
620206 2" 6 - 10' 5¼" 4 5/8" 7.5
6202011 2" 11 - 15' 5¼" 4 5/8" 7.5
62020PR 2" 0 - 5' 5¼" 4 5/8" 7.5
62020PR6 2" 6 - 10' 5¼" 4 5/8" 7.5
62020PR11 2" 11 - 15' 5¼" 4 5/8" 7.5

NOTE: The hydrostatic head pressure of the siphon is determined by the vertical height of the product in the system. It is usually measured from the top of the tank (highest liquid level) to the lowest point in the line. It is this vertical height that determines the spring pressure for the valve. If head pressure is not specified when ordering, the 0 - 5' setting will be supplied.


28

Emergency Vent

The Emergency Vent allows for relief of excess pressure created during filling an above ground storage tank or as a result of a fire. The vent is designed to open at approximately 1 PSI. The emergency vent features a rust resistant epoxy coated cast iron body, 40 mesh flame-retardant brass screen, plated steel pins and is available with male or female threads.

Product drawing

Model Size Type Height Width Weight (lbs.)
28-40F

4"

Female 6¼" 7 3/4" 16.5
28-40M 4" Male 6¼" 7 3/4" 15.5
28-60F 6" Female 5½" 10 1/8" 22.5
28-60M 6" Male 5½" 10 1/8" 18.5


113

Above Ground Containment Manhole

The Above Ground Containment Manhole is used to contain spillage during above ground storage tank filling. The manhole features a rust resistant epoxy coated steel body, 7 gallon capacity with internal drain valve assembly, lockable hinged cover with water shed design and female threads for easy installation onto a 4" fill riser.

Model Height Width Weight (lbs.)
113 14½" 19¾" 38.0


125

Spill Mate

The Spill Mate is used to contain spillage during above ground tank filling in remote fill applications. The Spill Mate features a rust resistant continuously welded 1/8" steel plate body, 20 gallon capacity, lockable hinged door, Buna-N compression watertight piping entry seal and 1" threaded coupling welded on top and bottom for easy installation of a hand pump or drain valve. The Spill Mate is delivered fully assembled and includes a compression fitting for each inlet.

Model # of Inlets Height Length Width Weight (lbs.)
1252FP20

One - 2"

50¼" 29½" 23¾" 131
1253FP20 One - 3" 50¼" 29½" 23¾" 131
1254FP20

One - 4"

50¼" 29½" 23¾" 131
1252FPV20 Two - 2" 50¼" 29½" 23¾" 133.5
1253FPV20 Two - 3" 50¼" 29½" 23¾" 133.5
1254FPV20 Two - 4" 50¼" 29½" 23¾" 133.5

NOTE: 7 gallon and 15 gallon capacity with special configurations available upon request.

NEW PRODUCT

8" Emergency Vent
For Above Ground Storage Tanks

PEMCO announces the addition of an 8" emergency vent to its series 28 for above ground storage tanks. Like the 4" and 6", the vent is designed to open at approximately 1 psi. It features a rust resistant epoxy coated cast iron hood, cast aluminum bottom housing, a 40 mesh flame-retardant brass screen and has a female threaded bottom.


Ó2000 Petroleum Equipment Manufacturing Company, Inc.
All Rights Reserved
Web Services by Dolphin