 |
Vapor Recovery
Products (page 2) |
|
550
|
Vapor Recovery Adaptor The Vapor Recovery Adapter is
used for returning vapors to the transport tanker during UST filling. This
poppeted adapter provides a vapor tight seal when not in use. The adapter
features a hard coated aluminum body, Buna-N gasket, chrome plated stem,
stainless steel spring and is rated at 10 PSI maximum working pressure.
Manufactured in accordance with the industry standard, this adapter can
be used with PEMCO or other brand vapor recovery caps.
Product
drawing
|
| Model |
Size |
Height |
Width |
Weight
(lbs.) |
| 5503X3 |
3" x
3"
|
5½" |
5" |
3.0 |
| 5503X4 |
3"
x 4" |
5¾" |
5" |
3.2 |
|
555
|
Vapor Recovery Cap
A toggle lever vapor recovery
cap that can be locked for security, which is both water and vapor tight.
The cap features an aluminum alloy body, plated steel arms, brass levers,
steel pins, a Buna-N gasket and an orange rust resistant epoxy coating.
Manufactured in accordance with the industry standard, this cap can be
used with PEMCO or other brand vapor recovery adapters.
Product
drawing
|
| Model |
Size |
Height |
Width |
Weight
(lbs.) |
| 555 |
4"
|
2½" |
7" |
1.7 |
|
525
|
Pipe Cap The Pipe Cap is used with
extractor vent valve assemblies for capping pipe. The cap features a rust
resistant epoxy coated aluminum body, plated steel crossbar and a Buna- N
gasket.
|
| Model |
Size |
Height |
Width |
Weight
(lbs.) |
| 525 |
4"
|
2½" |
5" |
1.3 |
|
100VR
|
Vapor Recovery Manhole
The Vapor Recovery Manhole is
ideal for installation over the vapor recovery adaptor. The words
"Vapor Recovery" are cast into the cover to allow quick
identification of the vapor lines in a dual point system. The manhole
features a cast iron ring and cover, steel skirt and carries the H-20 load
rating.
|
| Model |
Size |
Height |
Width |
Weight
(lbs.) |
| 100VR12X8 |
12"X8"
|
7¼" |
13¾" |
26.0 |
| 100VR12x12 |
12"X12" |
13¾" |
13¾" |
29.0 |
|
520W
|
Extractor Fitting Wrench
The Extractor Fitting Wrench
is used to remove the Model 520 Extractor Fitting from the Model 510
Extractor Vent Valve Assembly. It can also be used to install and remove
the Model 521 Test Plug which is placed in the Model 510 Extractor Vent
Valve Assembly during tank testing. The wrench features heavy duty steel
construction with reinforced welding and is protected with a black
coating.
|
| Model |
Length |
Weight
(lbs.) |
| 520W |
6¾"
|
14.1 |
|
251 & 251P
|
Coaxial Adaptor
A hard coated aluminum tight
fill adapter which provides for easy conversion of conventional
installations to single point Stage I vapor recovery. The Model 251 is
used with PEMCO Model 201 Coaxial Fill Tube and the Model 251 P is used
with PEMCO Model 201 P Spring Loaded Coaxial Fill Tube. Manufactured in
accordance with the industry standard, this adapter can be used with PEMCO
or other brand top seal caps.
|
| Model |
Size |
Height |
Width |
Weight
(lbs.) |
| 251 |
4" X
4"
|
4" |
5
3/8" |
1.5 |
| 251P |
4"
X 4" |
4" |
5
3/8" |
1.5 |
  
Ó2000 Petroleum Equipment Manufacturing
Company, Inc.
All Rights Reserved
|
